Tuesday, August 25, 2015

Tata Power gives an appreciation letter to TCR Engineering for its Metallurgical Testing Services work

Mr. Rohit Shukla, Lead Engineer(Metallurgy)-Asset Mgmt at The Tata Power Company Limited presented an appreciation letter to TCR Engineering in India for its work in the areas of Mechanical Testing, Fatigue testing (K1c, J1c, CTOD testing), Chemical Analysis, Positive Material Identification (PMI including onsite carbon detection), Non Destructive Testing (UT, DP, MP, PT, Automated UT using ToFD/Phased Array, Eddy Current Testing, Helium Leak Detection, Ferrite Measurement, Portable Hardness), Metallography, Welder Qualification (as per ASTM, ASME and API), RoHS Compliance Testing, In-situ Metallography (with SEM and EDAX), Sour Gas Corrosion Testing (including HIC/SSC), Risk Based Inspection as per API 581, Failure Analysis, Fitness for Service as per API 579, Vendor Evaluation, Factory Audits, Third Party Inspection, Metallurgical Product Evaluation, Post Weld Heat Treatment, Manpower Deployment, Training, Engineering Research and Consultancy using NDT Level III and AWS/CSWIP inspectors.
image

Monday, August 24, 2015

TCR Engineering of Mumbai receives appreciation letter from Emerson Process Management

TCR is the pioneer in India in carrying out various corrosion tests and have provided our services to many clients all over the world.  TCR Engineering Services (TCR), Founded in 1973, a NABL and ISO 17025 accredited independent material testing laboratory in Mumbai, India undertakes a wide range of corrosion and stress corrosion test per ASTM, NACE or as per an individual client’s requirements. Senior staff members are available to provide corrosion consulting, advice on corrosion prevention and corrosion control services including materials selection in laboratory or on-site inspection. Emerson Process Management has appreciated the work of TCR in material testing and NDT services in India.
image

Tuesday, August 18, 2015

TCR Arabia to participate in the 7th Middle East NDT Conference and Exhibition at booth E05 and E07

TCR Arabia, the leading material testing and NDT services company in Saudi Arabia will be making its presence felt at the 7th Middle East NDT Conference and Exhibition (MENDT) to be held from September 12-16 at the Gulf Hotel in Manama, Bahrain. The 7th MENDT, held under the aegis of H.E. Dr. Abdul Hussain bin Ali Mirza, Minister of Energy, Kingdom of Bahrain has steadily grown since 2001 to become one of the largest conferences in the Middle East. Mr. Mr. Mohammad Al-Salih, Conference Chairman as well as the Chairman of the Board, Saudi Arabian Section of ASNT has coined the theme of this conference to be “Innovations in NDT technologies”.
image

Mr. Syed Ameen Hassan, Country Manager of TCR Arabia will lead the delegation from the company and will be well represented by the technical managers of the company at the booth E05 and E07. TCR Arabia aims to showcase its advantages in the areas of Fitness for Service, Condition Assessment, Advanced NDT Services, NDT Training as well as its Metallurgical Testing Laboratory for Destructive Testing. TCR Arabia is based in Dammam with offices in Yanbu and Al-Jubail.
image

TCR Arabia, as part of its knowledge sharing, will conduct a workshop as well as present a paper at this conference.
image image Mr. Paresh Haribhakti, Director at TCR Arabia will conduct a workshop on 12th Sept, Saturday at the conference from 13:00 - 17:00 hours. The tittle of this workshop is "Fitness for Service". The FFS assessment is to ensure utilization of full potential of equipment concerning its damage assessment with engineering perspective. The typical outcome of a fitness-for-service approach provides a “go/no-go” decision. When ‘end-of-life’ like conditions, FFS outcome may also provide guideline on management decision for continual use of component through de-rated design parameters. It can help setting up proper inspection schedules, modified maintenance procedures and more of monitoring systems. The exercise in totality tends to assure safe with full economic benefit as well as help to take informed decisions. The workshop on FFS will be helpful to the plant engineers with systematic understanding of international standard along with damage mechanisms involved in failures of equipment affecting it useful life. The cost of this workshop is Bahraini Dinar BD 100 or US$ 270. To register for this workshop, please visit www.mendt.net
image
Mr. V.P. Sastry of TCR Arabia will present a paper on “Corrosion Under Insulation and Fire Proofing Materials” on September 16 at 11.10am.
image

As Eng. Fathi Al-Qadeeb, Chairman, Conference Executive Committees says in his address on the 7th MENDT brochure, "I look forward to meeting you all during 7th MENDT conference in September 2015.". imageTCR Arabia, joins Eng. Fathi Al-Qadeeb as well as the Saudi Arabian Section (SAS) of the American Society for Nondestructive Testing and the Bahrain Society of Engineers (BSE) in welcoming all delegates and participants to the 7th MENDT.

TCR Engineering gets an appreciation letter from MTAR

Mr. G.Srinivasa Rao, Manager Procurement - QA of MTAR - Hyderabad has deeply appreciated the material testing, metallurgical services laboratory work of TCR Engineering Services in Mumbai, India.
image

Monday, August 17, 2015

Paresh Haribhakti to speak and present paper at Fertiliser Association of India Program on ‘Materials of Construction for Chemical Process Plants’ during August 21-22, 2015 at IIChE(NRC), New Delhi

The Fertiliser Association of India along with the Indian Institute of Chemical Engineers have invited Mr. Paresh Haribhakti, MD of TCR Advanced Engineering to present a paper and speak at their program on ‘Materials of Construction for Chemical Process Plants’ during August 21-22, 2015 at IIChE(NRC), New Delhi. This event will be held at the premises of IIChE(NRC), at C-27, Qutab Institutional Area, New Delhi, India.
image
Mr. Paresh Haribhakti’s paper is on Saturday 22nd August and his topic will be on Fitness for Service (FFS): Utilizing the full potential of plant equipment beyond service life
image

TCR Engineering Services (Mumbai) gets appreciation letter for Metallurgical Testing Services from Godrej

Mr. Lobhesh Gondane, Senior Manager, Quality Assurance (Raw Material & Heat Treatment) of Godrej Precision Engineering sent the below appreciation letter to TCR Engineering Services. TCR Engineering Services (TCR), Founded in 1973, is a NABL and ISO 17025 accredited independent material testing laboratory with NDT services in Mumbai.
image

Technorati Tags: